Automatic production line of concrete air-entrained bricks for wall material production

WHAT IS AAC?The AAC production process includes raw material preparation, batching and mixing, pouring, precuring, cutting, autoclaving, and packing. With decades of experience in serving the AAC blocks production machinery industry, we can supply customers with quality AAC block production lines with capacit

Featured Products

WHAT IS AAC?
The AAC production process includes raw material preparation, batching and mixing, pouring, precuring, cutting, autoclaving, and packing. With decades of experience in serving the AAC blocks production machinery industry, we can supply customers with quality AAC block production lines with capacity ranging from 80,000m3 to 400,000m3 per year.

Automatic Concrete AAC Brick Production Line for Wall Material Making
Chart 1 the parameter of the processes
ProcessesParameter
Mixing period5-6 minutes
Pouring slurry temperature40-45ºC
Cake curing time2.5-3.0h
Cake curing temperature45~55ºC
Cake strength after curing0.15~0.18MPa
Autoclaved curing system Before-after autoclave0.5h
Vacuumize0.5h(0~-0.06MPa)
Listing pressure1.5h(-0.06~1.3MPa)
Constant pressure8h(1.3MPa)
Releasing pressure1.5h(1.3~0MPa)
total12h
 

 RAW MATERIALS  
Siliceous materials : Sand / Fly ash / Tailings containing silicon / Ceramic waste
Calcareous material: Lime block + cement + gypsum
Others: Aluminum powder paste  

Automatic Concrete AAC Brick Production Line for Wall Material Making
THE ADVANTAGES OF AAC:

1. Low density : Can be 325kg /m3
2. Good thermal insulating properties
3. Cost few time to build, saving time
4. Easy to operate , saving labor cost
5. Good performance of preventing fire
6. Good sound-insulation properties
7. Durable , anti-seismic , recyclable

Automatic Concrete AAC Brick Production Line for Wall Material Making

Automatic Concrete AAC Brick Production Line for Wall Material Making
CUTTING SYSTEM
Special cutting design : All the steel wire columns are fixed on two main oblique  beams of cutting machine and each pair of the columns is used to fix only one steel wire , so that the horizontal  cutting machine can avoid the settlement cracks problem in thin block and panel cutting , and achieve the minimum horizontal cutting thickness of 50mm block out of a whole mould. The integral swing frame of the vertical cutting machine can ensure the side plate replacement , the cutting action can be synchronized with ferry replacement. With automatic detection system . the broken wire can be timely detected.

Automatic Concrete AAC Brick Production Line for Wall Material Making

PACKING SYSTEM
Automatic packing system can realize the automatic rotation stacking and splicing of blocks and  realize the packing function with pallet or non-pallet. The stacking specification can realize 1.2m×0.6m\ 1.2m×1m\ 1.2m×12m\ 1m×0.6m multiple  stacking , and the height of the stacking can be 1.2m, 1.5m , 1.8m and 2.4m. 
Automatic Concrete AAC Brick Production Line for Wall Material Making
AAC FINAL PRODUCTS

 1.Product classification

Product classification is according to national standards GB/T 11968-2006 AAC block, also can be according to user's requirements to produce product with special specifications size.

 
Chart 2 Specification & Index
NameAAC block
Weight300~600 Kg/m3(control led by formula)
After autoclave compressive strengthaverage value≥3.5MPa, Min. value<=2.8Mpa
Drying shrinkage valueMeasured under condition of rapid method≤0.8mm/m;Measured under condition of standard method≤0.5mm/m
Frost-resistanceAfter the cycle of freezing and thawing for 15 times,weight loss≤ 5%,
strength loss≤ 20%
Coefficient of thermal conductivity≤0.14~0.16W/m.k
 
1.2 The block is classified by compressive strength and volume density.
Strength level: A1.0, A2.0, A2.5, A3.5, A5.0, A7.5, A10.
Dry density level: B03, B04, B05, B06, B07, B08.

 
 
1.3 Block level
The block is divided into high-class(A), first-class(B), qualified product (C) according to the size variation, appearance quality, dry density, compression strength & frost-resistance.
 

 
1.4  AAC Block indicator
Chart 3  Size variation& appearance
ProjectIndicator
High-class
(A)
Qualified product
(B)
Permissible variation of dimension
mm
LengthL±3±4
WidthB±1±2
HeightH±1±2
Missing angleThe min. size not more than /mm030
The max. size not more than /mm070
Missing angle no. larger than the above size, not more than02
Crack lengthThe crack length through one edge and two surfaces not more than crack directional size sum on crack surface01/3
The crack length of any surface can not be larger than crack directional size01/2
The cracks larger than the above size, not more than030
The depth of cracking, sticking, damage can not be more than/mm01030
Plain bendingNot allowed
Surface porosity, lamination crackNot allowed
Surface oilNot allowed
 
 
Chart 4  Cubic compression strength for block  
Strength levelCubic compression strength (MPa)
Average not less thanSingle group min. not less than
A1.01.00.8
A2.02.01.6
A2.52.52.0
A3.53.52.8
A5.054.0
A7.57.56.0
A10.0108.0
 
 
Chart 5  Dry density for block(kg/m3)
Dry density levelB03B04B05B06B07B08
Dry densityHigh-class (A)≤300400500600700800
Qualified product (B)≤325425525625725825
 
 
Chart 6  Strength level for block
Dry density levelB03B04B05B06B07B08
Strength levelHigh-class (A)≤A1.0A2.0A3.5A5.0A7.5A10.0
Qualified product (B)≤A2.5A3.5A5.0A7.5

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours