Lightweight Concrete Wall Panels for Exterior/Interior Walls and Floor Hotel Walls

New Energy Building System wall Board Insulation PanelZJT Concrete panel company is the 1st Company that innovates, commercializes and adapts the technologies to provide new ideas products and to be the No. 1 Lightweight Wall Panels Supplier / Producer in the Country.  Our proposed product is more economical,

Featured Products

New Energy Building System wall Board Insulation Panel

ZJT Concrete panel company is the 1st Company that innovates, commercializes and adapts the technologies to provide new ideas products and to be the No. 1 Lightweight Wall Panels Supplier / Producer in the Country.  Our proposed product is more economical, easy and much faster in the installation and ready for the painting than the Blocks & Gypsum Partitions etc., which gives a better 

1 ZJT Sandwich Panel Type
-- With EPS grain
--With Ceramsite

2 ZJT Sandwich Panel Composition
Face: Calcium Silicate Board
Core: Cement+EPS Polystyrene Foam+Sand


Light Concrete Wall Panel for Exterior/Interior Wall and Floor Hotel Wall

Light Concrete Wall Panel for Exterior/Interior Wall and Floor Hotel Wall

ZJT Sandwich Panel Specifications

Length: 2270/2440
Thickness: 60/75/90/120/150/180/200mm
Width: 610mm

Light Concrete Wall Panel for Exterior/Interior Wall and Floor Hotel Wall

Specification
ItemParameter Index Specifications 
60mm75mm90mm100mm120mm150mm180mm
1Anti-impact capacity/times≥5≥5≥5≥5≥5≥5≥5
2Anti-bending damage load/times over deadweight≥3.0≥3.0≥3.0≥3.0≥5.0≥5.0≥7.0
3Compressive strength/Mpa≥3.5≥3.5≥3.5≥3.5≥3.5≥3.5≥3.5
4Softening coefficient≥0.8≥0.8≥0.8≥0.8≥0.8≥0.8≥0.8
5Surface density(kg/m2)≤70≤70≤90≤90≤110≤110≤130
6Moisture rate(%)≤10≤10≤10≤10≤8≤8≤8
7Dring shrinkage value(mm/m)≤0.5≤0.5≤0.5≤0.5≤0.5≤0.5≤0.5
8Hang force(N)≥1000≥1000≥1000≥1000≥1000≥1000≥1000
9Sound insulation capacity in the air(dB)≥35≥35≥40≥40≥45≥50≥55
10Fire endurance(h)≥1.5≥1.5≥2.5≥2.5≥3.0≥4.5≥6.0
11Heat transfer coefficient(w/m2.k)≤2.0≤2.0≤2.0≤2.0≤2.0≤2.0≤2.0
12Inner radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 
13Outer radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 
14Frost resistance(shall show no visible cracks and surface without change)__shall show no visible cracks and surface without change
15The combustion properties(A1 or A2)__A1 or A2


ZJT Sandwich Panel Advantages

1) Heat insulation and Preservation The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which could adjust the indoor temperature at a constant range thus achieving the effects of ecological adjustment.

2) Waterproof and Fireproof The face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials is a mixture of cement, sand, fly ash etc.

Fireproof and high temperature resistant: Throw it into boiling water or in fire, last for four hours, it's nonflammable

Thickness(mm)Fire endurance(H)
60≥2
75≥3
90≥3.5
100≥4
120≥4.5
150≥5

3) Sound insulation and Absorption The inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing.
ItemUnit60mm75mm90mm100mm120mm150mm
Sound insulation capacityDB≥35≥40≥40≥45≥50≥55
 
ItemUnit60mm75mm90mm100mm120mm150mm
Anti-bending damage loadTimes of self-weight≥5≥5≥5≥7≥8≥9
Compression strengthMpa≥4.2≥4.2≥4.8≥4.8≥5.14≥5.14
Anti-impact strengthTimes of self-weight≥5.0≥5.0≥5.0≥5.0≥5.0≥5.0
Load capacityN≥1000≥1000≥1000≥1000≥1000≥1000
4) Easy construction and Time Saving For the same construction work that takes 12 people and 60 minuses to complete with traditional blocks, only 3 people and 60 minutes will do with boards, thus can save a lot of labor and time cost for the construction part.

5) High intensity and Quake Proof The energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes.

6) Space and Cost Saving For its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot.


5 ZJT Sandwich Panel Application
Floor System
ZJT light weight compound sandwich panel can be innovatively used as floor board. This system has the outstanding advantages such as hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.

Villa&Exterior Wall System
Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, and such ecology effect just goes with the tide of modern residential building.

Interior Partition System
Light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.

Roof System
Light weight compound sandwich panel roof system brings brand-new added value and application idea to the traditional roof construction. Its easy construction time, which bring out its hight integrated performance.

Light Concrete Wall Panel for Exterior/Interior Wall and Floor Hotel Wall
Light Concrete Wall Panel for Exterior/Interior Wall and Floor Hotel Wall
Light Concrete Wall Panel for Exterior/Interior Wall and Floor Hotel Wall


6.ZJT Sandwich Panel Packing
1)Free packing, normal pallet + packing belt
2)Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3)Loading: Normally 18 pallets per 20' container or according to clients' requirements

Light Concrete Wall Panel for Exterior/Interior Wall and Floor Hotel Wall



Installation

There're two kinds of ways to install, vertically, and horizontally
Light Concrete Wall Panel for Exterior/Interior Wall and Floor Hotel Wall



Why are ZJT concrete wall panels better than brick wall
•    Quick to install
•    No need for skilled labor
•    No plaster just wall putty
•    Electrical installations easy
•    Cheap raw material
•    Light to handle
•    Rather large-sized elements



About us
Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. We can produce more than 2 million square meters of various wall materials annually

Contact
Warm Regards
 
 
Xiamen Zhongjingtai Building Materials Co.,Ltd
Add: Unit-2A-D Lianchang Building No6-8 Huli Avenue, Huli District Xiamen Fujian China
 
 
 
Website: Http://zjteps.en.made-in-china.com  Http://zjteps.en.made-in-china.com  

 .

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours