Shockproof Lightweight Precast Concrete EPS Cement Sandwich Wall Panel

acoustic panel cheap sound absorbing board polyester   Are you still waiting for more than half a year before you can move inside to your new house?Are you still working in dirty and wet construction site, moving many heavy machines to the site? Are you still paying high salary to the workers and still u

Featured Products

acoustic panel cheap sound absorbing board polyester 

Are you still waiting for more than half a year before you can move inside to your new house?
Are you still working in dirty and wet construction site, moving many heavy machines to the site? 
Are you still paying high salary to the workers and still unhappy about the final work? 
Are you still...?

You are so lucky to be here and get to know the best substitute to traditional wall materials. It is called eps cement sandwich wall panel. Compared with other wall materials, it's stronger and longer in life span and contains many advantages and wide usages.

 1.What is the EPS Sandwich Cement Wall Panel ?
ZJT lightweight energy saving composite eps sandwich cement wall panel is a new type wall panel insteading of the traditional bricks with the advanced production technology and following the mordern construction criteria. It is composed of the face panel and the interior fillings. The material of face panel is calcium silicate board(firber cement board) and the core materials are sand,cement,eps foam,water ann fly ash.
Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels

2.Parameter Index
ItemParameter Index Specifications
1Anti-impact capacity/times≥5≥5≥5≥5≥5≥5
2Anti-bending damage load/times over deadweight≥3.0≥3.0≥3.0≥3.0≥3.0≥3.0
3Compressive strength/Mpa≥3.5≥3.5≥3.5≥3.5≥3.5≥3.5
4Softening coefficient≥0.8≥0.8≥0.8≥0.8≥0.8≥0.8
5Surface density(kg/m³)≤70≤70≤90≤90≤110≤110
6Moisture rate(%)≤10≤10≤10≤10≤8≤8
7Dring shrinkage value(mm/m)≤0.5≤0.5≤0.5≤0.5≤0.5≤0.5
8Hang force(N)≥1000≥1000≥1000≥1000≥1000≥1000
9Sound insulation capacity in the air(dB)≥35≥35≥40≥40≥45≥50
10Fire endurance(h)≥1.5≥1.5≥2.5≥2.5≥3.0≥4.5
11Heat transfer coefficient(w/m2/k)≤2.0≤2.0≤2.0≤2.0≤2.0≤2.0
12Inner radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 
13Outer radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 
14Frost resistance(shall show no visible cracks and surface without change)----shall show no visible cracks and surface without change
15The combustion properties(A1 or A2)----A1 or A2
16Acoustic performance
- 60 mm thick
- 75 mm thick
- 100 mm thick
- 120 mm thick
- 150 mm thick
38 dB
40 dB
42 dB
44 dB
46 dB

3.Sizes of our sandwich cement wall panel

 Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels


Thickness: 60/75/90/100/120/150mm

60mm could be applied to roof
75/90/100mm are recommended to intenal/partition wall
120/150mm are recommended to external wall 
120mm could also be used to floor

It is also depended on the requirement of clients.


1).Heat Insulation and Preservation
The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which can adjust the indoor temperature at a constant range to achieve the effects of ecological adjustment.

2).Waterproof and Fireproof
The face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials are the mixture of cement, sand, fly ash, etc.It does well in the fireproof and waterptoof.

3).Sound Insulation and Absorption
The inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing.

4).Easy Construction and Time Saving
For the same construction work that takes 12 people and 60 minuses to complete with traditional blocks, only 3 people and 60 minutes will do with boards, thus it can save a lot of labor and time cost for the construction part. 

5).High Intensity and Quake Proof
The energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes.

6).Space and Cost Saving
For its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot.

7).High Recycled Ultilization Ratio
The panel is solid and strong physical performance,anti-corrosion,high strength and low damage rate.If ZJT's dry splicing method was put to use ,wall panel reuse rate would up 93%which can save 71%~95% of wall panel cost.

8).Strong Hanging Force and can be Slotted
ZJT panel can meet various of demands and can be easily slotted to bury pipes and electric wires and also will reduce dust and increase the operation environment quality. 


Lightweight fireproof partition panels can be customized in lengthis mainly for interior and exterior non-bearing wall partition. 
1. General industrial buildings, high building, KTV 
2.Industrial:buildings:factory,wall,partitions,school dividingwall 
3. Commercial:buildings:shopping mall,KTV,highoffice building partitions 
4. Residentialhouses:low rise&high-rise 
5.Government  housing project,prefab house 
6.Fire-rated wall partitions1-4hours 
7. Residential buildings 
8.Single house 
9. Public construction, hotels, hospitals, schools 
10. The fence of the factory 
11. Kitchen, bathroom, and the toilet of indoor wall. 
12. Also can paste on tiles and cement mortar.


ZJT light weight composite sandwich wall panel can be innovatively used as floor and roof .This system has the outstanding hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.
Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels

Internal&Partition Wall

Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, and such ecology effect just goes with the tide of modern residential building.

Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels

External Wall
External Wall Light weight compound sandwich board have been widely applied to the special positions with the steel structure, like partition panel of high-rise and mega-high-rise buildings.
Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels
Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels
Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels
Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels
Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels

6.The Installation Steps

 Alignment:making the base line of the installation position of the wallboard.
Sawing of wallboard:cutting and adjusting the width and length of wallboard on the basis of the requirement.
Sizing: blending the ZJT cement mortar and plastering it into the gap and base line bettwen the wallboard.
Fitting the sheet: moving the mortar-covered wallboard to the right position and using crowbar to ensure the wallboard are tight with another one.
Placing the wallboard: filling the vacant position of the wall 
Adjustment: fixing the wallboard with wooden wedge, spiking steel bar into the glued wallboard an two steel bars should be spiked beyong 120mm wall board.
Filling joints: clear away the facial panel  cement mortar and press it tightly with round steel bar.
Installation of crack-resistant material: after about one week, taking out the wooden wedges and paste the anti-crack tape with cement mortar.
Insertion of wires: do not dig the same place in the two wallboard facial and the deep can't beyond 2/3 of the wallboard.
Plastering paint: to finish the wal, tiles can be paste without any scraping and wallpaper also can be applied directly.

7.Packing Details

1) Free packing :normal pallet + packing belt
2) Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3) Loading:Normally 18 pallets per 20' container or according to clients' requirements    

Single(piece)Load by 20'GPLoad by 40'GP

Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels

8. FAQ

1. What is your mainly products?
    Our mainly products are sandwich wall panel and  color steel panel .

2. What is your delivery time?
    One 20'GP container, about 10 working days.

3. How about the samples?
   The samples is free, but the delivery cost will be on ur account, and we will deduct it after you place the order.

4. What is your time of making samples?
     Usually we will take 1~3 days to make the sample.

5.  What is your payment terms?
     Normally we accept 30% T/T in advance,70% after shipment. Or Irrevocable L/C.
6. What is the shipping port?
     Xiamen port.

9.Our Company
Xiamen ZhongJingtai Building Materials Co., Ltd, a professional high-tech research and development company specializes in producing new energy-saving wall materials, machinery and equipment development, technology production and promotion of product applications. Our company is situated in the charming city---Xiamen, with convenience of water and land transportation and only 15 minutes from the airport. We focus on persuing to the environmental and energy-saving modern wall materials and also positively respond to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. In addition, We can produce more than 2 million square meters of various wall materials annually. Quality fisrt, honesty and  win-win cooperation are our management ideas.      
Our company relying on the advanced equipment, first-class technology, excellent quality, strong productivity, favorable customer service system, has set up the good brand image in the market and been widely recognized by many other countries.If applied it on your buildings, it will improve your work effeciency,  promote your work environment, save your work time, save your living space and be convenient for the late maintenance. 
We have been taking part in the trade shows in home and abroad and getting more  cooperations and recognizations with foreign customers.  
We adhere to the Concept--first-rate service,quality first and win-win cooperation.
We have exported to many places around the world, such as, Saudi, Philippine,Jordan,Dubai,Australia,Canada,Qatar.Our clients are speak for us.
Our clients will be the spokesperson for our spokesman .
 Quakeproof Light Weight Precast Concrete EPS Cement Sandwich Wall Panels

11.Contact Us

zoe zeng
Tel: 0086-592-5216902
Fax: 0086-592-5216317

Company Address: Xiamen ZhongJingTai Building Materials CO., Ltd.
Unit 2A, Lianchang Building, No 6-8Huli District,Xiamen, China.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours